Drying Times

Once dried, the Zinga film requires exposure to fresh air, carbon dioxide and moisture to become fully cured. The natural porosity of the coating is dramatically reduced as curing takes place, and Zinga continues to harden for several weeks after application.

It is very important to note that before exposure to a saline environment (i.e. submerged in salt water or placed in a salt spray zone) all zinganised surfaces will require saturation with fresh water for a minimum of two hours to properly seal them. If the coating is unlikely to be immediately exposed to a salt atmosphere then exposure to rainwater or heavy overnight condensation for a couple of days will have the same sealing effect. Zinga can also be forced dried using Infrared drying systems.